LEV Testing · Newquay
The Aerohub enterprise zone at Newquay airport and the town's surf and marine trades raise weld fume, resin vapour and dust the law says must be controlled. We examine and test local exhaust ventilation to HSG258 and certify it.
Newquay's working side is unusual for a resort - the Aerohub enterprise zone at the airport runs aerospace and engineering firms, while the surf industry and boatyards work resin and composites for boards and craft. Their welding and machining bays, resin and glassfibre shops and spray booths all raise something a local exhaust system has to capture at source.
LEV is tested hard by aerospace and resin work and quietly loses its edge - filters load, ducts fur, a fan tires - until a hood stops holding the exposure. We carry out thorough examination and testing to HSG258 across Newquay: measured capture and face velocities at the working points, a judgement against how the system was meant to perform, and a label carrying a next-due date you can trust.
CNC and manual machining raises oil mist and metal dust at the enclosure and bench that has to be captured at source.
Flour, powders and steam need capture at the mixing and process points, from bakeries to production kitchens.
Saws, sanders and routers throw fine wood dust that has to be drawn off at the tool and the bench.
Weld fume and grinding dust need capture at the arm and booth, wherever steel is fabricated.
Bodyshop spray booths and prep bays carry paint mist and solvent vapour that the extraction has to hold and clear.
Fume cupboards, safety cabinets and dental and salon extraction all count as LEV and all fall due on the same clock.
Real jobs, described by sector and area - never by a client's name.
In an Aerohub aerospace unit, the weld-fume and machining-mist extraction needed its thorough examination. We measured capture at the arms and enclosures and the transport velocity, found one reading down, set the fix, and re-tested before certifying.
A Newquay surf-board and boat shop needed its resin and glassfibre extraction testing. We measured capture at the working points, checked the airflow, and labelled the system with the readings and next-due date.
Condition of hoods, ducting, filters and fan - the damage, blockage and wear that quietly drops performance.
Measured capture and face velocities at the working points, plus transport velocity and static pressure through the system.
The readings assessed against how the LEV should perform to actually control the exposure - not just whether the fan turns.
Where the process warrants it, sampling to confirm the control is keeping the substance out of the breathing zone.
The point of a thorough examination and test is to prove the extraction still controls the exposure - so we measure it, we do not eyeball it. Condition, capture and face velocities, transport velocity and static pressure are checked against the design intent under HSG258, and the result is written up and labelled on the plant.
We test to the HSE's guidance, HSG258, and the job ends in a report and a label on the plant: what was measured, what passed, what needs putting right, and the date the next test falls due.
We examine the condition of the hoods, ducting, filter and fan and how each is meant to control its process.
We measure capture and face velocities, transport velocity and static pressure at every key point.
The readings are judged against the design benchmark under HSG258, with a clear pass or fail on control.
The plant is labelled and you get the report and next-due date for your COSHH records.
At least every 14 months for most systems, sooner for higher-risk work such as resin work and heavy welding. We match the interval to the process and label the next-due date on the plant.
The condition of hoods, ducts, filters and fan, and measured capture, face, transport and static-pressure readings - all weighed against how the LEV should perform to control the exposure.
We set out what failed and why, usually a single reading, so it can be corrected, then re-test to confirm control before certifying.
Yes - the aerospace, engineering, surf and marine units across Newquay, and the wider Cornwall.
No - weld fume, resin and glassfibre vapour, machining mist, metal and wood dust and fume cupboards all fall under the same duty.
The Aerohub and the surf and marine shops carry Newquay's welding, machining and resin trades, the fume, mist and dust drawn off wherever it is raised. We test to HSG258 so those lines can prove their extraction holds what their people would otherwise breathe.
We have carried out LEV thorough examination and testing to HSG258 since 2001, across Cornwall and the UK. From a machine shop to a joinery, a spray booth or a lab fume cupboard, the job ends the same way: measured readings, a clear verdict, and a label whose next-due date you can rely on.
Tell us what you run and we will examine, measure, report and label it to HSG258 - across Cornwall.
