LEV Testing · London
LEV testing across London - the outer boroughs, from Croydon and Bromley to Harrow, Enfield and Romford. COSHH thorough examination and test of the fume and dust extraction in your workshops - measured, reported and certified.
London's outer boroughs run in a ring around the capital - Croydon, Bromley, Sutton and Kingston to the south, Harrow, Wembley, Ruislip and Hounslow to the west, Enfield and Edgware to the north, and Romford, Hornchurch, Ilford and Walthamstow to the east, down to Woolwich, Eltham and Lewisham on the river. It is a hospitality economy of enormous density, high street on high street, with the trade estates and light-industrial units woven between them.
Every workshop across London that welds, machines, sprays, mills or bakes raises fume, mist or dust the law says must be controlled. We examine and test local exhaust ventilation across London to HSG258 - measured capture, a clear verdict and a reliable next-due date, from Bromley to Woolwich.
The point of a thorough examination and test is to prove the extraction still controls the exposure - so we measure it, we do not eyeball it. Condition, capture and face velocities, transport velocity and static pressure are checked against the design intent under HSG258, and the result is written up and labelled on the plant.
From a Romford tannery to a Sidcup lens lab, the job ends in a report and a label - what was measured, what passed, and the date the next test falls due.
The hoods and capture points are where the system either catches the fume, mist or dust or lets it escape. We measure capture and face velocities where the contaminant is released.
We check the ducting for transport velocity and leaks and assess the filter or air cleaner - the parts that quietly degrade and drop a system below its design performance.
We test the fan performance and the discharge, and measure the static pressure across the system - the readings that reveal a system pulling below its design figure.
London's outer boroughs carry a light-industrial economy as varied as the city itself, and each site owes the same duty to control what it raises and to prove it. Commercial laundries run at Hornchurch and Uxbridge, print and packaging at Hounslow and Walthamstow, and a leather tannery at Romford, while sheet-metal fabrication works at Kingston and Wembley and vehicle paint at Ruislip. Sidcup grinds ophthalmic lenses, Sutton cuts worktop and memorial stone, Eltham builds motorsport and specialist engineering, and analytical and research laboratories run at Bromley and Woolwich, with engineering units throughout. We examine and test the extraction on all of it to HSG258.
We examine the hoods, ducting, filter and fan and identify how each is meant to control its process.
We record capture and face velocities, transport velocity and static pressure at every key point.
The readings are assessed against the design intent under HSG258, with a clear verdict on control.
The plant is labelled with the result and next-due date, and you get the report for the COSHH file.
Yes - across the outer boroughs, from Croydon, Bromley, Sutton and Kingston to Harrow, Wembley, Ruislip, Uxbridge and Hounslow, Enfield and Edgware, and Romford, Hornchurch, Ilford, Walthamstow, Woolwich, Eltham, Lewisham and Sidcup. Each town has its own page for this service; call 07961 915018 or use the contact form and we will confirm and quote.
Yes. We look after multi-site operators across London on one schedule - a single survey, one set of certificates and a next-due date per site - so a group with kitchens in several boroughs keeps its compliance in one place.
Yes. We work overnight, early mornings, weekends and closing days so a London kitchen or workshop keeps running while we clean, degrease or test.
Yes. Duct and extraction cleaning is certified to TR19 Grease with a photo record, kitchen deep cleans carry a certificate and report for your food hygiene file, and LEV testing is reported and labelled to HSG258.
We have carried out LEV thorough examination and testing to HSG258 since 2001, across London and the UK. From a machine shop to a joinery, a spray booth or a lab fume cupboard, the job ends the same way: measured readings, a clear verdict, and a label whose next-due date you can rely on.
Tell us your site and we will survey, quote and certify - anywhere in London.
